Porter Cable 7 1/4 and 6" Saw Boss
The 7 1/4 is a great saw, tough enough for any job.
It's not as light as I would like it to be, however it's
like a bull and thats what you want from this saw.
The 6" little saw boss is also a great power tool to have.
It's great for those little jobs....well I used it on 3/4 plywood,
and buzzed thru that like butta, and also it likes 2X4's. All
around a great saw....And it has some weight to it too. (bonus)
| Precision Circular Saw Guide |
| Accu-Guide is perfect for ripping a sheet of plywood or paneling, trimming the edge of a panel or door, and even cutting a 1/8" slice of wood. Guide rail eliminates saw drift for a perfect cut every time! Precision Circular Saw Guide |  |
Click to buy...one of my favorites
They always say you can never have too many routers.
I have 5 with one in the router table. Again, porter cable is the way to go.
They are built for production, and never give me a problem. One thing that
I would like to see done is a better way to release the bit. The 2hp plunge is nice
because when mounted under the table you can raise the collet almost above the plate,
which gives you more room to get the wrenches in there without having to take it out. I would say my two favorites are the 2hp and 3 1/4hp. They both have the power and flexability that any professional requires.Click on the links and check them out.
speedmatic 3 1/4hp
2-1/4 HP, 12 amp soft-start motor/
Variable speed from 10,000-23,000 RPM with advanced electronic feedback to maintain constant cutter speed under load/ Upper and lower power switches/
Low noise vibration/ Above-table bit height adjustment, motor release, collet and bit access, and auto-engaging spindle lock for single wrench bit changes/
Through-the-base dust collection/
Large opening, see-through sub-base with quick-change release for tool-less changeover between router bases and router tables/
Carrying case with bit and accessory storage easily detaches into a pedestal to place the router between cuts
Includes CD-ROM that highlights tips and techniques
Porter-Cable 891 Grip Vac Router Package
- 5 Amp, AC/DC
4,500 RPM
Rugged worm gear drive
100% ball & needle bearings
Cuts 1-5/16'' at 90 degress & 1-1/16'' at 45 degrees
Standard Equipment: Combination Blade #12009, Blade Wrench #48317, Knob #857990, and operating manual
Click here to buy and more details
 | Offset Router Plate
New and improved offset router plate provides maximum control of fixed base routers. Reduces the natural tipping that can occur when routing an edge...Offset Router Plate |
4-1/2'' Trim Saw, Model #314
